Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

£9.9
FREE Shipping

Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

I had to use an 8" coarse wire wheel in a 3600 rpm bench grinder to get that damned water washable crap off the plate. Compared with ordinary 2K LCD 3D printers, its printing volume is 37% higher than Mars 2, XY accuracy is up to 35 microns, 30% higher than Mars 2 series, higher printing efficiency, more stable performance, and less maintenance.

I pealed the backing off the magnetic sheet, lined it up and stuck it to the build plate, I then left it on a flat surface with some weights on the top of the plate and left it over night to allow it to stick well and truly.There are three versions included, the Supported and Unsupported are designed for printing flat on the build plate of your Mars 2 (Mars/Mars Pro will need to be angled). This is a design to extend the Elegoo Mars endstop arm to accommodate the Wham Bam flexible build plate. No more spatula scraping and breaking prints from fragile materials (I am looking at you, Elegoo Standard! It also seems with your complete tear down and mods, you’re on the fast track to being able to design a new printer from scratch that massively outperforms the Mars. The following day I put the steel flex plate onto the magnetic base, I had a nice little pinch on my finger where the plate snapped to the magnet so be careful.

However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. For ensuring that the print sticks to the flex plate platform, I also roughened it with 80 sandpaper and a random orbital sander - now the prints adhere super to the flex plate, the flex plate adheres super to the platform.What used to take me 20 minutes and somehow leave me with cuts now takes a minute tops, thanks to these.

Once you’ve finished printing, remove the stainless steel plate, flex the print off, and snap the Fula-Flex back onto the magnetic sheet! The plate is very secure on the magnetic base and doesn't want to move, however using the little tabs will come of when you want it to. Awesome; trying to think of reasons why this hasnt been done yet; then again I dont think there is a reason why it hasnt been done on all fdm printer yet either; sometimes someone just has to do the obvious, to get the herd moving, and this seems like one of those cases. But this method also has disadvantages: The flex plate and the magnetic sticker build up relatively high (about 2. The rate of laser power drop is related to the frequency of use, working hours, and working environment.Helps hold the build plate while parts are removed without putting pressure on the buildplate's ball-joint. Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. After printing, the flexible build plate can be detached from the magnetic base and the print can be removed more easily by gently bending it.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop